UN-PLUG & BLAST! The M6 800, aka The Green Machine 2.0, takes the fun of surfing, snowboarding, mountain biking, and other adrenaline sports -- combines it with skateboarding & off-road trails, then throws it all at you in one super fun package! Powered by our most powerful ALT MODULE 800. It's available in Racing Green & Black with Exkate Cyclone wheels & 9" pneumatic knobby tires, on our 15" Exkate Torsion Trucks which we call "Ground Controls." Designed in Orange County, California.

Patented 20 MPH Wireless remote control electric skateboard. 36 volt removable battery pack & charger. The environmentally-friendly electric power engages a quiet belt driven motor. Electric Skateboarding is both an exciting sport as well as it's perfect for transportation on short distance commutes. Runs like a Ferrari, built like a tank. This model is optimized for riders 160 to 225 lbs.

Your Price: $799.95

Technical Specs

Maximum Rider Weight: 260 lbs. Optimized for riders 160 to 225 lbs.
Acceleration: 0-20 MPH in 5 SECONDS!
Braking: 20-0 MPH in approx 40 FT
Turning Radius: 10 FT
Battery Pack: 36 Volt, 12 Amp Hour (3 batteries)
Battery Charger: 120/230 Volt, 2 Amp (included)
Charging Time: Approximately 4 hours
Range: 10-12 Miles
Motor: 36 Volts DC, 800 Watt.
Electronics: Patented ALTERED™ 2G Digital Wireless
Dimensions: 43"L x 10.5"W
Weight: 65 lbs
Trucks: Patented Exkate Ground Control torsion trucks
Wheels: Exkate Cyclone wheels w/ 9" pneumatic knobby tires
Controller: Patented Wireless controller for acceleration & braking. Multiple speed switch w/ 3 settings
Deck: EPX Resin-9, 9-ply's of Multiple Stained Maple Veneers with 8 EXP Resin bonds
Color: British Racing Green & Black with Red & White Logos
PROTECTED PATENTS: Wireless Skateboard & Torsion Trucks

ALTERED™ 2G Digital Wireless

In reality an Altered Electric Skateboard is both a skateboard and a wireless computer. For 09, we spent nearly a year & a half developing the finest digital wireless electronics available. We have the patent on the wireless feature and we partnered with a Silicon Valley corporation to raise the bar to the highest levels.

How does it work? and how does it Start & Stop? The board is controlled with a handheld wireless controller that offers a variable throttle and motor braking. You simply stand on the board and pull the trigger SLOWLY & SMOOTHLY to accelerate, and push the trigger forward GENTLEY to brake. With a little experience, it's relatively simple to "roll the board along" at low speeds. Pushing forward on the controller's trigger applies resistance to the skateboard's motor, providing an effective braking system to slow the board down. With an Altered™ Electric Skateboard, you have hands free operation, so there's no tether to get tangled up in

EXKATE® Torsion Trucks

The new M6 is outfitted with our 15" Exkate Torsion Trucks which we call - Ground Controls. Patented Exkate torsion trucks TWIST to turn. Right out of the gate these trucks made a quantum leap in skateboard turning technology. They allow tighter radius turns. Combined with oversized wheels and cutting edge shapes - the result is simply amazing.

DWINDLE EPX RESIN DECKS

Downloads
Lost or misplaced your owner's manual? You can download a PDF of the owner's manual by clicking the button below. Requires Adobe Reader.

Owner's Manual
Download Owner's Manual

READ THIS BEFORE USE - Quick Start / General Information
Download the Quick Start / General Information Sheet

FAQ's - Most Popular Questions

How fast does it go?
Depends on your weight and the terrain, but 20 mph is an approximate top-end.

How long does it take to charge?
Recharging takes approximately 4 hours.

How far does it go?
Approximately 10 miles/15 kms, which also depends on your weight and the terrain ridden.

How does it work?
The board is powered by a 36V electric motor using sealed batteries as an energy source. It's controlled with a handheld wireless controller that offers a variable throttle and motor braking. You simply stand on the board and pull the trigger SLOWLY & SMOOTHLY to accelerate, and push the trigger forward GENTLEY to brake. It's relatively simple to "roll the board along" at very low speeds. Pushing forward on the controller's trigger applies resistance to the skateboard's motor, providing an effective braking system. With an Altered™ Electric Skateboard, you have hands free operation, so there's no tether to get tangled up in.

* Please note that we strongly recommend wearing a Helmet and Pads at all times.

more>

Action Pics & Videos

		Altered Promo Video Altered M4's touring the North Shore Altered on Hawaiian Xtreme Sports TV AES Photo Gallery / Slideshow More coming soon!